If you've ever had to assemble an electronic drum kit, you'll know that it's not always as easy as it looks. Even accidentally swapping a single cable can lead to some odd trigger behavior. This article will walk through how to easily troubleshoot and resolve some of the most common trigger issues with the DM10 drum module.
Scenario: You open the DM10 kit for the first time and you are following the assembly guide on setting up your kit. Once that process is complete and you turn on the unit, you receive a message stating: "Calibration fail Try rebooting with drums unplugged or without touching them".
This is very likely just a mix up with the cabling and therefore the module cannot calibrate the triggers properly. Here are some troubleshooting steps in resolving this problem:
Turn off the module and look carefully at the tip of your cable snake. Each cable has a color-coded label to help you connect it to the correct pad. Please be sure that the red label reading "CRASH" is connected to Port 7 on your module and your 14" dual-zone pad. This is the most common mistake.
The DM10 kits come with 3 types of cymbals, (2) single zone, (1) dual zone and (1) triple zone. In order to use the choke function of the Drum kit, you'll need to be using the dual or triple zone pads, connected to the module via TRS cables.
On DM10 Kits, only the Crash and Ride ports have the choke feature. Perc 2- 4 are dual zone ports that will support additional dual drum pads or single zone cymbal.
If you're having trouble triggering the choke on your crash or ride, ensure that they are connected to the correct ports using the provided TRS cables (TS will not work). The choke-able cymbals will have a rubber trigger area that extends around the edge and underneath the cymbal, creating a grip. The choke function will only work when grabbing this portion of the cymbal.
The image below shows the bottom side of a DM10 Choke-able Ride cymbal. Note the rubber grip that extends along the cymbals bottom edge.
The DM10 default settings allow the user to play immediately upon connection, but, like any new kit, sometimes a few small adjustments are needed in order for the DM10 to be up, running, and ready to rock with your style of playing. While there are lots of fine-tuning options available that you may become familiar with over time, this guide (and video) walks through the main settings to adjust in order to get playing as quickly as possible!
Whether you are a customer or dealer, if you already own an Alesis product, or if you just have pre-sales questions, the Alesis technical support team is available to help!
Each product has a dedicated support page on the website where you can find manuals, specifications, software updates, drivers and troubleshooting guides: www.alesis.com
Visit the link below to connect with any of the following support options: online community support, phone support, email support.