This nine-piece electronic drum kit features an exclusive Alesis mesh snare and mesh kick that deliver an authentic drumming experience. This article walks through a number of frequently asked questions about the Alesis Command X Kit.
The Command X Kit uses the same responsive mesh heads, module and hardware as the original Command Kit but also includes an additional cymbal with choke functionality. The Command X Kit also features red appointments on the snare, toms, kick drum stand, and cymbal pads.
The Command X Kit comes with everything you need to start playing right away! Including:
The Command X Advanced Drum Module comes with 70 kits (50 factory + 20 user) and 600 sounds. You can load .WAV samples and play-along with tracks via a USB memory stick. Additionally, the Advanced module has real-time recording (5 tracks internally; up to 99 tracks via USB memory stick)! It comes with a USB/MIDI output for use with virtual instrument and recording software that allows the module to send MIDI information to the computer to trigger your favorite DAW or virtual instrument.
Yes! Simply connect the USB cable to your computer and it will function with any DAW or music software that accepts MIDI information. It is class-compliant which means that it will work with any modern Mac or PC without the need to download any software or drivers.
The default Trigger MIDI Note assignments are as follows:
|Kick Drum||36||Tom 3 (Center)||43||Crash 1||49|
|Snare Drum (Center)||38||Tom 3 (Rim)||58||Crash 1 (Edge)||55|
|Snare Rim||40||Tom 4 (Center)||41||Crash 2||57|
|Tom 1 (Center)||48||Tom 4 (Rim)||39||Crash 2 (Edge)||52|
|Tom 1 (Rim)||50||Ride Bow||51||Hi-Hat Open||46|
|Tom 2 (Center)||45||Ride Edge||59||Hi-Hat Closed||42|
|Tom 2 (Rim)||47||Ride Bell||53||Hi-Hat Pedal||44|
The Command X Kit allows you to add any WAV file up to 16-bit/48kHz to a 4GB - 64GB FAT32 formatted USB drive. It also allows you to add to or create your own unique kits. Each sample must be a16-bit mono WAV file with a maximum size of 15 MB. It can have a sampling rate of 48, 44.1, 32, 22.05, or 11.025 kHz.
To load your own samples from a USB flash drive to use as voices within a kit:
While other standard or dual-zone single pads will likely work, the Command X Kit module is configured to respond optimally with the included drum kit. You could potentially use third-party standard triggers, however, since other manufacturers design triggers specifically for different drum modules, not all triggers may respond as expected.
To save a kit to a USB flash drive:
To load a kit from a USB flash drive:
The Hi-Hat pedal included with the Command X Kit is a continuous variable type pedal. This pedal allows for open, half-open, and closed hi-hat sounds, and will also allow for "chick" and "splash" sounds when the pedal is pressed down and released without striking the hi-hat cymbal pad.
To return the drum module to its original default settings:
My headphones have a built-in microphone. Can I use these with my module?
The headphone output of the module is a common 1/8th inch (3.5mm) stereo output. Using headphones with a built-in microphone (TRRS) may cause drops in your audio. It is recommended to use standard headphones with a TRS cable.
Whether you are a customer or dealer, if you already own a Alesis product, or if you just have pre-sales questions, the Alesis technical support team is available to help!
Each product has a dedicated support page on the website where you can find manuals, specifications, software updates, drivers and troubleshooting guides: www.alesis.com
Visit the link below to connect with any of the following support options: online community support, phone support, email support.